Bet Angel Automation - Shared files : Scalping the favorite

Share your automation file with other users.
Post Reply
sonaht
Posts: 24
Joined: Tue Dec 16, 2014 7:37 am

Tue Feb 17, 2015 9:14 pm

Ok,
here is another one.
Just for the fun of it!
The idea came from the video on BetAngel tv regarding scalping the favorite!
Inspiring, Thank you!

So..
i took it and added some more to it.
At first it was scalping like crazy with no restrictions or criteria on all of the price range.
The result, around 50-50... not good.
I noticed that the money prefers to creep around the crossover points of the scale..especially on the last minutes.

This automation
- is scalping only around the crossover points (Lay bet, offset with greening and trailing stop (configurable))
- Greens up PRE play if you are RED over -3 or so.
- Greens up IN play (if any bets are kept for inplay)
- Greens up IN play, if you are RED over -2,5 or so.)

The thing is to place bet if the LAY side has greater % than the BACK side, on specific time range and on selected spots (crossovers) around the ladder.

Fully customizable ( i looove it)
Worked much better than blind scalping.
AS ALWAYS,
USE in PRACTICE at first.

"Wise use it you shall"
:p

Flood this post with comments!
You do not have the required permissions to view the files attached to this post.

chris13f
Posts: 5
Joined: Sun Jan 26, 2014 7:02 am

Thu Feb 19, 2015 5:41 am

Hi Sonaht i can not open the Attachment can you please post it a differant way i would like to give it a try as im new to this thank you

User avatar
Euler
Posts: 15114
Joined: Wed Nov 10, 2010 1:39 pm
Location: Bet Angel HQ
Contact:

Thu Feb 19, 2015 8:35 am

You need to save it somewhere on your hard drive then open it from within the automation tool in Bet Angel.

ronniem
Posts: 7
Joined: Sat Aug 08, 2009 10:22 am

Thu Feb 19, 2015 9:42 am

Slight typo in .baf file
3rd rule Back scalp 1st (odds 2.88 up to 3.3)
3rd condition Back price of selection in sorted price

Back price is less than 2.1 NOT 8

Quick question Why £4.5 stakes? Any reason?

Hope this helps.

Ronnie

ronniem
Posts: 7
Joined: Sat Aug 08, 2009 10:22 am

Thu Feb 19, 2015 9:44 am

Typo to the typo post

Should read

3rd rule Back scalp 1st (odds 1.96 up to 2.1)

Doh!

sonaht
Posts: 24
Joined: Tue Dec 16, 2014 7:37 am

Thu Feb 19, 2015 7:51 pm

Hello,
i noticed today the typo. It has been corrected on the V2 attachment.
Changes:
- a bit tighter on the odds.
- a bit tighter on the time before start
- changed the stake amount to use liability of 18
- number of unmatched condition is 10.
- changed a bit the green up rule.

This rule in total is picky.
It will not activate on all race cards during the day.
USE IT IN PRACTICE MODE PLEASE.

IMPORTANT NOTE:
PLEASE CHECK ON THE CONDITIONS THAT THE DIFFERENCE BETWEEN 1st AND 2nd IS 10 ticks.
It should be 10 so as to face the less surprises possible...
You do not have the required permissions to view the files attached to this post.
Last edited by sonaht on Sat Feb 21, 2015 10:24 am, edited 2 times in total.

sonaht
Posts: 24
Joined: Tue Dec 16, 2014 7:37 am

Thu Feb 19, 2015 7:55 pm

- The stake amount used is customizable.
I had used on thee 1st one a fixed amount.
On the 2nd version i used stake by liability.
10 unmatched stakes are allowed * 14 liability on each = 140 on your currency.

- The .baf file is on the correct format. You just need to copy paste it on the Automation directory on your Bet angel directory.
It should appear on you automation list.
If not restart Betangel.

sonaht
Posts: 24
Joined: Tue Dec 16, 2014 7:37 am

Sat Feb 21, 2015 10:26 am

I would love to see some good and bad comments from the testing community!!!

chris13f
Posts: 5
Joined: Sun Jan 26, 2014 7:02 am

Sat Feb 21, 2015 11:49 am

Thanks Sonaht going to give it a try later and will give feedback do you have any others that work ?

Vexxejr
Posts: 5
Joined: Sun Feb 15, 2015 3:32 pm

Sat Feb 21, 2015 4:45 pm

Thanks, enjoy testing things like this.

But i am fairly new to this unfortunately, can anybody point me in the direction of a guide on how to use .baf files?

Alternatively explain it for me?

Thanks

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest