UPDATED: New beta version of Bet Angel v1.51.1 - Now on general release

[convoysur-2]

Big Thanks to peter and the betangel team-
Great job on improvements and videos are great- Thank you .
Well done lads( and ladies if there are any )

[RonObvious]

Hi,

On the manual bet screen I have added additional columns and created a rules file to use stored values to populate these columns every 60 seconds with the Implied Probability of the runner.

With this new Beta and the ability to display stored values on the ladder, does this mean I can now display my rules file on top of the ladder? I.E: Instead of using the manual bet screen to update a new column every 1 minute can this information now appear on top of the ladder every minute or am I being overly optimistic?

Thanks

[Dallas]

Hi,

On the manual bet screen I have added additional columns and created a rules file to use stored values to populate these columns every 60 seconds with the Implied Probability of the runner.

With this new Beta and the ability to display stored values on the ladder, does this mean I can now display my rules rule on top of the ladder? I.E: Instead of using the manual bet screen to update a new column every 1 minute can this information now appear on top of the ladder every minute or am I being overly optimistic?

Thanks

Yes that can now be done, I included it in a servant file posted a few days ago just to give people a quick Idea
viewtopic.php?f=58&t=17245

[RonObvious]

Yes that can now be done, I included it in a servant file posted a few days ago just to give people a quick Idea
viewtopic.php?f=58&t=17245

I didnt explain it very well sorry Dallas.

If you see the image below from another thread topic the 3 columns on the right where stored values are used to populate the columns with the odds at 5, 4 and 3 minutes is it possible for this information to appear in sequence in the additional information area of the ladder? So at 5 mins out 2.3 would appear, then at 4 minutes 2.26 would appear beside 2.3 (as in the picture) and so on each minute until post. So at post time in this example you would have the 3 different prices side by side in the additional information area.

[Dallas]

Yes that can now be done, I included it in a servant file posted a few days ago just to give people a quick Idea
viewtopic.php?f=58&t=17245

I didnt explain it very well sorry Dallas.

If you see the image below from another thread topic the 3 columns on the right where stored values are used to populate the columns with the odds at 5, 4 and 3 minutes is it possible for this information to appear in sequence in the additional information area of the ladder? So at 5 mins out 2.3 would appear, then at 4 minutes 2.26 would appear beside 2.3 (as in the picture) and so on each minute until post. So at post time in this example you would have the 3 different prices side by side in the additional information area.

Yes, that can still be done it just requires extra rows to be added.

In the new additional information of the ladder settings area for row 1 select the name of the stored value to be used (ie 'five' to replicate where that screenshot comes).
Then add a 2nd row and select the name of that stored value to be used (ie, 'four') and so on until you have as many rows as you need

If you still get stuck it's perhaps better to start a new thread to keep this one clear just for issues/problems with the beta itself

[RonObvious]

Yes, that can still be done it just requires extra rows to be added.

In the new additional information of the ladder settings area for row 1 select the name of the stored value to be used (ie 'five' to replicate where that screenshot comes).
Then add a 2nd row and select the name of that stored value to be used (ie, 'four') and so on until you have as many rows as you need

If you still get stuck it's perhaps better to start a new thread to keep this one clear just for issues/problems with the beta itself

Perfect thank you, just needed to know it was possible

[gsa]

Great Update. I love the new options in the ladder screen. To display the "Stored Value" helps alot.

Just one request (for the next update): Please make the "Tennis Relative Scores" in the Automation also working in Tie-Breaks.

Cheers

Georg

[jupiter_man]

After I updated it to V1.51 then my guardian setting does not save, I have to manually change the refresh interval / restrict refresh etc every time I use it.
I have been using BA for a long time and it never happen before.

For example, I set my restrict refresh to from 100s before start and 10s after start, then save the setting as Setting1
Then I load up another setting (Setting2) with 20s before start and 20s after start, it works fine.
Then when I would like to load Setting1 again, the restrict refresh remain at 20s before start and 20s after start.

Whenever I changed any setting, I did go to "setting" and press "save setting", this is what I have been doing and I dont know why it suddenly does not work anymore.
Thanks for your help.

[MemphisFlash]

i have noticed that too! the refresh rate seems to default to 1 second and i have to change to 20ms.

[Bet Angel]

Thanks. We'll look to recreate that during this week and report back.

[Bet Angel]

After I updated it to V1.51 then my guardian setting does not save, I have to manually change the refresh interval / restrict refresh etc every time I use it.

We've had a quick look at this and so far haven't been able to recreate the issue, so wonder if there is some other setting that is conflicting and preventing the Guardian setting from saving.
Could you try opening Bet Angel with <factory default> settings on the login screen and then only change the Guardian settings that are causing you problems (e.g. restricted refresh) and then save. Change the settings to different values and then save again under a different name. Then see if you experience the same issues when switching from one setting to another.

By the way, when you initially saw the problem, were you starting with a setting profile that had been created with a previous version of Bet Angel? That is fully supported and should work without issue, but just trying to narrow the scenario to help us recreate.

[gsa]

I am testing the Beta Version on my laptop. Just had the problem twice, that BetAngel stopped working, when I tried to import a rule file in the automation. Never had this problem before on the laptop or any other PC (with older versions of BetAngel). Might still be a local problem only, but I wanted to report it anyway....

Georg

[Bet Angel]

Might still be a local problem only, but I wanted to report it anyway....

Thanks - was it an Automation file that you downloaded from this forum or something that you've created yourself on another PC? If you send it to us in a support ticket, we'll try to recreate.
Were you using the Import menu item in Guardian's header or the one in the Servant Manager menu?

[Korattt]

I keep having to change my advanced chart settings back to my desired settings every time I log in?, old settings are stored ok but since new update I'm unable to set up a new screen profile & store it.. & it seems to be just the advanced chart settings?, it must be something I'm doing wrong.. any clues?

my desired settings

Advanced Chart Settings.png

"default" settings every time I log in post update?

Advanced Chart Settings pre.png

[Dabbla]

I keep having to change my advanced chart settings back to my desired settings every time I log in?, old settings are stored ok but since new update I'm unable to set up a new screen profile & store it.. & it seems to be just the advanced chart settings?, it must be something I'm doing wrong.. any clues?

Are you saving them as settings or view ? Charts settings should be saved as settings(top of the main screen).

You said " I'm unable to set up a new screen profile & store it"
You dont want to save it as a screen profile.