Pre-Race Data Collection on Fav During Final 5 Mins

Post Reply
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

iambic_pentameter wrote:
Sun Aug 13, 2017 9:00 pm
Sorry to post here but what I'm asking is sort of related.

Is there a way to use Bet Angel to collect prices on all the runners once a race has gone in play - for example:

1) Recording all the price movements per runner in 5, 10, 15 second intervals i.e

Fav has BSP of 4.0 and then goes to 4.2, 3.9 etc?

2) Time stamp those prices at 5secs after post it was X, 10 secs Y etc?

Hope that makes sense?

Iambic
Yes, there is a few data capture sheets that will do this in the Betfair data section, link below is for a no frills one that will do what your after
http://www.betangel.com/forum/viewtopic.php?f=54&t=2385
iambic_pentameter
Posts: 443
Joined: Wed May 18, 2016 1:24 pm

Hi Dallas

Even on a Sunday night, you are there to answer queries - really appreciated, thank you.

Iambic
redbasil
Posts: 68
Joined: Tue Feb 01, 2011 1:50 pm

Hi Dallas I have a couple of questions regarding this automation, is it possible to set a rule so that if another horse is close or near the favourites price it won't trigger the bet? For example within 10%, Or secondly just back the horse that has has taken the biggest % of the money?
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

redbasil wrote:
Wed Aug 16, 2017 5:11 pm
Hi Dallas I have a couple of questions regarding this automation, is it possible to set a rule so that if another horse is close or near the favourites price it won't trigger the bet? For example within 10%, Or secondly just back the horse that has has taken the biggest % of the money?
The purpose really is to trigger all the time (with min stakes) to capture data for every race but you can add conditions to stop it in certain cases if you wish, to do so if the 2nd fav is near you could copy the setting used in the bot below as that's set to trigger if the 2nd fav gets within 1 odds
http://www.betangel.com/forum/viewtopic ... 52&t=14682

However there is no condition to look for the runner with the higher % of vol but you can
redbasil
Posts: 68
Joined: Tue Feb 01, 2011 1:50 pm

I see what you mean regarding using it as a data collection program bit I've been using the program to larger stakes on certain races to great effect it's only the close favs that catch me out so was hoping for a solution.
I noticed on another thread you said I could apply a "fix the order " rule I'm not entirely sure what you mean by this?
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

redbasil wrote:
Wed Aug 16, 2017 5:55 pm
I see what you mean regarding using it as a data collection program bit I've been using the program to larger stakes on certain races to great effect it's only the close favs that catch me out so was hoping for a solution.
I noticed on another thread you said I could apply a "fix the order " rule I'm not entirely sure what you mean by this?
Ok in that case have a look at the rule i linking to in my last post and that will show the settings need to identify if the 2nd fav is close in price to the fav.

The 'fix order of market' is a rule type you can add so that when it triggers from that point on it doesn't matter what happens with the prices your other rule will remember the order.
ie, if you had this set to trigger at the start of a race and had a rule that scalps the 2nd fav it would continue to target the same horse no matter how its price moved in-running as the rule would always reference this horse as 2nd fav
redbasil
Posts: 68
Joined: Tue Feb 01, 2011 1:50 pm

Thankyou very much for your time as always Dallas
redbasil
Posts: 68
Joined: Tue Feb 01, 2011 1:50 pm

Hi Dallas been looking around the site but can't find an answer! Is it possible to run 2 different automations on the same races?
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

redbasil wrote:
Thu Aug 17, 2017 5:01 pm
Hi Dallas been looking around the site but can't find an answer! Is it possible to run 2 different automations on the same races?
Its only possible to run one automation file per market but that file can contain multiple rules/strategies
http://www.betangel.com/forum/viewtopic ... 47&t=11857
redbasil
Posts: 68
Joined: Tue Feb 01, 2011 1:50 pm

Hi Dallas sorry I thought I'd sent the text of thanks but still in draft... also I wanted to ask is it possible to add a rule/condition that the fav also has to be in row 1?
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

redbasil wrote:
Sat Aug 19, 2017 4:28 pm
Hi Dallas sorry I thought I'd sent the text of thanks but still in draft... also I wanted to ask is it possible to add a rule/condition that the fav also has to be in row 1?
Yes, you would add a 'Set/modify signal' applied to row 1 rule and on the signal tab use 'set a signal' on selection (give it any name you want)

Then on your main back rule add a condition
'Signal Set Condition'
Is Signal named (whatever you called it above)
on selection
Set with a value
redbasil
Posts: 68
Joined: Tue Feb 01, 2011 1:50 pm

Thankyou Dallas your time is very much appreciated
redbasil
Posts: 68
Joined: Tue Feb 01, 2011 1:50 pm

Hi again Dallas I'm not entirely sure how to set a price range for a selection? for example under 4.0 Cheers
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

redbasil wrote:
Sun Aug 27, 2017 10:36 am
Hi again Dallas I'm not entirely sure how to set a price range for a selection? for example under 4.0 Cheers
It just needs a 'fixed odds cond' adding with
selections last traded price
is less than 4.0

If you add another fixed odds condition you can create a range
redbasil
Posts: 68
Joined: Tue Feb 01, 2011 1:50 pm

Was looking at that just wasn't sure it was correct.. yet again many thanks Dallas.
Post Reply

Return to “Bet Angel Automation - Horse racing - Pre off”