Oppose the Morning Tipster Guardian Automation Bot

Post Reply
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Copenhagen trader wrote:
Sun Feb 18, 2018 10:16 am
It still does not fire. The Signal for Market and the Signal for Current Selection tabs, what should they be set on?
The original automation file did not use any signals
Copenhagen trader
Posts: 52
Joined: Fri Apr 17, 2009 3:15 pm

Ok. I cannot see what prevents it from firing.
I will try again. Erased and downloaded the file again. I have changed the stakes, since 2kr. is below the minimum stake. Otherwise nothing.
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Copenhagen trader wrote:
Sun Feb 18, 2018 12:46 pm
Ok. I cannot see what prevents it from firing.
I will try again. Erased and downloaded the file again. I have changed the stakes, since 2kr. is below the minimum stake. Otherwise nothing.
How many markets do you have in guardian and what refresh rates do you have guardian set to use?
Copenhagen trader
Posts: 52
Joined: Fri Apr 17, 2009 3:15 pm

Refresh rate in Guardian is set for 300 ms.
I had approx. 25 markets in Guardian.
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Copenhagen trader wrote:
Sun Feb 18, 2018 1:35 pm
Refresh rate in Guardian is set for 300 ms.
I had approx. 25 markets in Guardian.
Ok that shouldn't cause it to miss any triggers, it would be worth increasing to 20ms (if you're using streaming) while you test tomorrow just to eliminate it for sure
Copenhagen trader
Posts: 52
Joined: Fri Apr 17, 2009 3:15 pm

Thanks, I will try that.
Copenhagen trader
Posts: 52
Joined: Fri Apr 17, 2009 3:15 pm

Hi
I think I have found out why it doesn´t fire so much. Betangel stalls and does not refresh. Is there a way to secure that Betangel doesn´t stop by means of the settings? Should I use lower refresh rate?
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Copenhagen trader wrote:
Tue Feb 20, 2018 9:58 am
Hi
I think I have found out why it doesn´t fire so much. Betangel stalls and does not refresh. Is there a way to secure that Betangel doesn´t stop by means of the settings? Should I use lower refresh rate?
It shouldn't stall unless there is a problem at BF (then others would notice) perhaps your PC/laptop is going to sleep/hibernating?
Copenhagen trader
Posts: 52
Joined: Fri Apr 17, 2009 3:15 pm

No the PC does not sleep/hibernate.
But I have found out that if I use streaming (I tick the box under Edit Settings/Communications) the Guardian does not update?? That is "Last update" stops.
I use a refresh rate on 200 milliseconds, there is no 20 milliseconds available as far as I can see.
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Copenhagen trader wrote:
Tue Feb 20, 2018 11:38 am
No the PC does not sleep/hibernate.
But I have found out that if I use streaming (I tick the box under Edit Settings/Communications) the Guardian does not update?? That is "Last update" stops.
I use a refresh rate on 200 milliseconds, there is no 20 milliseconds availablenas far as I can see.
The 20ms refresh rate is only available with streaming enabled

Unless your changing profiles (and ones using a 'restrict refresh') then enabling/disabling streaming should not stop the guardian updates (you will just have the faster refresh rates)
Copenhagen trader
Posts: 52
Joined: Fri Apr 17, 2009 3:15 pm

Strange, because whenever I enable streaming "Last update" stops in Guardian.
By the way, now I see 20 milliseconds when enabling streaming, so that´s fine.
But still Last update in Guardian stops.
Is it because I use the Danish NEM-ID version?
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Copenhagen trader wrote:
Tue Feb 20, 2018 11:53 am
Strange, because whenever I enable streaming "Last update" stops in Guardian.
By the way, now I see 20 milliseconds when enabling streaming, so that´s fine.
But still Last update in Guardian stops.
Is it because I use the Danish NEM-ID version?
No im sure streaming would work just the same for Danish users,
If you load a market on the main screen does streaming work there?

Also one quick thing to try is logging out then back in using the two factory default profiles and see if that works (it may be a saved profile has become corrupted but the factory defaults will confirm if this is the case).
Copenhagen trader
Posts: 52
Joined: Fri Apr 17, 2009 3:15 pm

Done that.
Streaming works in Guardian eg. Tennis, but NOT the horse racing :o
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Copenhagen trader wrote:
Tue Feb 20, 2018 12:19 pm
Done that.
Streaming works in Guardian eg. Tennis, but NOT the horse racing :o
I'm sure racing markets have just recently been enabled for Danish users (local law change or BF)?
If that's so its possible the 'streaming' for it has not yet been done especially with it being available on other markets
I guess if you added tennis, football and racing markets to guardian at the same time with streaming the racing would still get ignored?

Anyway for what your doing and the number of markets you have in guardian if you use 200ms with polling that should work just as well with this rule so if you give that a try and see how that goes tomorrow
Copenhagen trader
Posts: 52
Joined: Fri Apr 17, 2009 3:15 pm

Thanks Dallas, I think you are right.
I will try and do that.
Post Reply

Return to “Bet Angel Automation - Horse racing - Pre off”