Bet Angel Automation - Shared files : Guardian Automation Shared Files library - Suggestions

Share your automation file with other users.
Post Reply
JMoney
Posts: 4
Joined: Fri Mar 04, 2016 11:37 am

Tue Oct 25, 2016 1:54 pm

Looking at testing something out. just wanted to make sure I'd set it up right if im looking at backing horses that have moved in price of a certain percentage type, over a certain period of time. e.g. 1 Hour before the race up to 1min before the off. Would I be correct in thinking the condition is,
1. Historic Relative Odds
2. Any Selection if any horse
3. The Price At The Rule Trigger Time.
4. Then the amount of Second e.g. 1min = 60 1hr= 3600secs 2hr=7200

Then if I want the selection to have a certain price and now less,
You should select fixed odds condition and then select the parameters?

Appreciate any comments correcting me if i'm wrong and any help given to correct it. once I have run a test to see if the method works I will post for users to play around with.

Kind Regards
JJ

User avatar
Dallas
Posts: 8151
Joined: Sun Aug 09, 2015 10:57 pm

Tue Oct 25, 2016 2:05 pm

Even if the rule is only set to arm in the final min its condtions will still check back for as long as the markets been loaded into guardian, so if the condition is looking for something that has moved X ticks during the last hour then as long as the markets been in guardian for this amount of time it will find it even if the rule is only armed to trigger in the final minute.

The condtion type you stated is the correct one to use, there is a example file avalaible to download if you want to see if full set up, This file looks for 10 ticks moves in the final 10 mins so could quickly be edited to look for a different amount of ticks over 1hr.

The time is always entered in seconds so your correct in saying 3600 = 1hr and so on...

User avatar
Dallas
Posts: 8151
Joined: Sun Aug 09, 2015 10:57 pm

Wed Nov 23, 2016 4:25 pm

If anyone wants to put forward a suggestion for an automation rule if they can add it to this thread rather than PM'ing it to me then other users can add their thoughts to it so i can get a better idea of what ppl want.

User avatar
Kaz2
Posts: 40
Joined: Fri Feb 24, 2017 11:33 am

Fri Apr 21, 2017 6:04 pm

Hello Dallas,

Not sure this is the right place to ask, but I wonder can you help me with a condition I want to add to an automated file I am using please? All I want to do is to make the scalping file I am using fire a 'green up' (actually a red up) when I am in a given minus position, it could be -£5, -£10, whatever I want to set it at. Can you tell me how I would do this please?

Thanks.
Kaz

User avatar
Dallas
Posts: 8151
Joined: Sun Aug 09, 2015 10:57 pm

Fri Apr 21, 2017 6:20 pm

Kaz2 wrote:
Fri Apr 21, 2017 6:04 pm
Hello Dallas,

Not sure this is the right place to ask, but I wonder can you help me with a condition I want to add to an automated file I am using please? All I want to do is to make the scalping file I am using fire a 'green up' (actually a red up) when I am in a given minus position, it could be -£5, -£10, whatever I want to set it at. Can you tell me how I would do this please?

Thanks.
Kaz
If you add a 'Green All Selections' rule type and set up as follows

General Tab
Green all Selections
Arm 00:00:01 after event goes in play (or whatever time you want the rule to be active from)
Till 00:10:00 after event goes in play (or what ever time you want the rule to be active till)

Parameters Tab
None

Conditions Tab
Green all profit condition
Less than -£5 ( or whatever you want to use)

If you then want your rule to stop placing further bets if you have redded up then follow the instructions in this thread
http://www.betangel.com/forum/viewtopic ... 47&t=11656

If you get stuck their is a few ready made files you could use or copy from
http://www.betangel.com/forum/viewtopic ... 43&t=11407
http://www.betangel.com/forum/viewtopic ... 43&t=11954

User avatar
Kaz2
Posts: 40
Joined: Fri Feb 24, 2017 11:33 am

Fri Apr 21, 2017 6:33 pm

Thank you Dallas, excellent!
Kaz

User avatar
Kaz2
Posts: 40
Joined: Fri Feb 24, 2017 11:33 am

Tue Apr 25, 2017 5:38 pm

Hello Dallas,

I was caught out today when a horse was withdrawn with just a couple of minutes to go. The automation I was using fired a lot more times because the market was suddenly suspended, and then being reformed.

Is there a ready made rules file that can help with this eventuality?

I would very much appreciate your help and advice when you have time.

Thanks in advance.
Kaz

User avatar
Dallas
Posts: 8151
Joined: Sun Aug 09, 2015 10:57 pm

Tue Apr 25, 2017 7:31 pm

Kaz2 wrote:
Tue Apr 25, 2017 5:38 pm
Hello Dallas,

I was caught out today when a horse was withdrawn with just a couple of minutes to go. The automation I was using fired a lot more times because the market was suddenly suspended, and then being reformed.

Is there a ready made rules file that can help with this eventuality?

I would very much appreciate your help and advice when you have time.

Thanks in advance.
Kaz
There is a 'Unsuspended time condition' which you could add to your back/lay rules that would protect against this, you could set it for something like greater than 60 secs which would allow the market to of mostly reformed following a suspension before allowing your rule to trigger again. Or if you used something like greater than 300secs it would more or less stop any pre-race automation from triggering any more once their has been a suspension in the last 5 mins.

Obviously markets can sometimes suspend for other reasons so just need to take that into consideration

User avatar
Kaz2
Posts: 40
Joined: Fri Feb 24, 2017 11:33 am

Wed Apr 26, 2017 7:19 am

Thank you Dallas, thats perfect, its for pre race so I will find that and make use of it.

Thanks again for your reply.
Kaz

User avatar
Kaz2
Posts: 40
Joined: Fri Feb 24, 2017 11:33 am

Tue May 09, 2017 6:05 pm

Hi again,

I wonder if anyone could advise me please. I am unable to work out which rule I need (automation) that will only allow one bet to be placed and matched on a selection. I have scanned through the rules available and I cant seem to see the one I want.

I know it must be available as I have seen Dallas writing here (somewhere) that one of the 'bots' will only trade one one horse once, and thats what I can find. I want a rule that will only allow one selection to be traded once.

Any help would be very much appreciated.

Thanks in advance
Kaz

Post Reply

Return to “Bet Angel Automation - Shared files”

  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest