Bet Angel Automation - Shared files : Step-By-Step Examples How to Set Automation Signals

Share your automation file with other users.
Post Reply
charger123
Posts: 23
Joined: Sat Jan 14, 2017 12:55 pm

Sun Feb 19, 2017 10:50 am

Good Day Dallas,
You seem to be the God of signaling, so I thought I'd ask you, is it possible to use a time reference, and montior the change in volume on a selection. I'm looking at say a £1000 jump in 2 seconds. If you have any temples with this type of rule, I'd be glad of the pointer. Also looking at a WOM bot on 2nd & 3rd fav. to trigger 1st fav. At moment I'm having to fire 2 bets in, out of the money (1.01) to trigger 1st fav using unmatched bets condition, (ie. '2') cause there's no 'by selection' on WOM condition. Didn't realise at the time, but just been charged for over bet count, that hurt! Any help on these issues will be greatly received. Thank you.

User avatar
Dallas
Posts: 7092
Joined: Sun Aug 09, 2015 10:57 pm

Sun Feb 19, 2017 11:45 am

charger123 wrote:
Sun Feb 19, 2017 10:50 am
Good Day Dallas,
You seem to be the God of signaling, so I thought I'd ask you, is it possible to use a time reference, and montior the change in volume on a selection. I'm looking at say a £1000 jump in 2 seconds. If you have any temples with this type of rule, I'd be glad of the pointer. Also looking at a WOM bot on 2nd & 3rd fav. to trigger 1st fav. At moment I'm having to fire 2 bets in, out of the money (1.01) to trigger 1st fav using unmatched bets condition, (ie. '2') cause there's no 'by selection' on WOM condition. Didn't realise at the time, but just been charged for over bet count, that hurt! Any help on these issues will be greatly received. Thank you.
Regarding your volume question not really as the increased amount can't be specfied within the conditions, it may be possible to set up a series of signals which are set when the volume amount is say 100k then 102k, 104k, 106k and so on then check the times between these but it would nt be very accurate.

For you WOM question im not 100% sure what you mean - are you asking that if for example the 2nd & 3rd fav both have greater than 80% WOM at the same time trigger a bet on the fav from this but if only one is over this then still no bet?

charger123
Posts: 23
Joined: Sat Jan 14, 2017 12:55 pm

Sun Feb 19, 2017 12:10 pm

Hi dallas,
thanks for coming back, yes reguarding the WOM question, that is correct. Just wonding if it could be signaled, cause it should be faster too, with not having to poll BF before the triggering, cheers.

User avatar
Dallas
Posts: 7092
Joined: Sun Aug 09, 2015 10:57 pm

Sun Feb 19, 2017 12:23 pm

Yes it could be done with signals, the best way would be to use the rule type
Set/Modify Signal
Applied to 2nd fav
Condition Tab
WOM >80% (or whatever you want to use)
Signal Tab
Increment Signal Value

then repeat that but apply to 3rd fav

Then add the following rule type
Clear all signals for market and selections
Condition Tab
WOM <79%

Finally on your bet rule on the fav add the following condition
Signal Value condition
Is equal to 2

Basically when one of them meets your WOM condition a signal is set with a value of 1, if its goes back below its reset ready for the next time, if its still above and the other runner meets your WOM condition the signal value is increased to 2.
Only when the value reaches 2 will the bet on the fav trigger

Hope that helps

charger123
Posts: 23
Joined: Sat Jan 14, 2017 12:55 pm

Sun Feb 19, 2017 12:38 pm

Cheers Dallas, thats just what I'm looking for, I may want to hold the value of them for say 2 seconds. Would this be difficult to do, if so I'll just play around with this. and thanks again, your work this invaluable.

User avatar
Dallas
Posts: 7092
Joined: Sun Aug 09, 2015 10:57 pm

Sun Feb 19, 2017 12:44 pm

If you mean once both signals have been set then still dont trigger the bet untill they have been set for at least 2 seconds then if you also add the following condition to you bet rule

Signal Changed condition
Changed between 2 and 3 secs ago

That will do it for you

charger123
Posts: 23
Joined: Sat Jan 14, 2017 12:55 pm

Sun Feb 19, 2017 12:58 pm

Thanks again, but I was trying to hold on to one of the 2nd or 3rd fav's values for 2 seconds to get more chance of a trigger.

User avatar
Dallas
Posts: 7092
Joined: Sun Aug 09, 2015 10:57 pm

Sun Feb 19, 2017 1:22 pm

Its still doable but would require another set of signals for each runner which is set if falls back below 79% and only if the original signal is set, the clear signals rule would now need to look at this and only clear if the new 2nd signal was set 2-3 secs ago

charger123
Posts: 23
Joined: Sat Jan 14, 2017 12:55 pm

Sun Feb 19, 2017 1:53 pm

Sounds quite heavy, might have ago tonight with a couple of glasses of wine down me. Thanks for all your help today, its opened up new horizons. So for now a BIG CHEERS to you.

charger123
Posts: 23
Joined: Sat Jan 14, 2017 12:55 pm

Wed Feb 22, 2017 11:03 am

Hi Dallas,
Enjoying the whole signalling thing, and saw one of your posts on log watching (for want of a better word). Can the latest log be sorted form the top. There seems lots of codes on the right click for right and left alignment but nothing for top/bottom. Maybe BA should set this as default, it seems more useful this way. Thanks

Post Reply

Return to “Bet Angel Automation - Shared files”

  • Information
  • Who is online

    Users browsing this forum: No registered users and 3 guests