Thanks for your prompt and kind assistance...
I've added the signal to ignore selection row 1 as you rightly directed, but i'm not sure if I did it correctly, because it is still triggering row 1.
Can you please, view the attached to see what is possibly wrong with the bot?
Thanks...
Lay the First to Trade at 2.0 Guardian Automation Bot
Thanks for your prompt and kind assistance...
Not very familiar with signals yet but I've managed to add the signal to ignore selection row 1 as you rightly suggested, though honestly, i'm not quite sure if I did it correctly, because it is still triggering row 1.
So please sir, Can you please, view the attached to see what is possibly wrong with my setting?
Thanks...
Not very familiar with signals yet but I've managed to add the signal to ignore selection row 1 as you rightly suggested, though honestly, i'm not quite sure if I did it correctly, because it is still triggering row 1.
So please sir, Can you please, view the attached to see what is possibly wrong with my setting?
Thanks...
You do not have the required permissions to view the files attached to this post.
You'll find that the selection in row 1 wins more because its usually the pre race fav.
But you can of course tell the automation to ignore it
If you add a set/modify signal applied to Betfair row1
arm it to trigger 1 just before the off
on the signal tab set a signal on the selection and give it a name (ie, lets call it 'ignore')
Then on the lay rule go on to the condition tab and add the following condition
Is the signal set on the selection
with the name 'Ignore'
NOT set with a value
What you basically doing is setting a signal on row then telling the lay rule only to trigger on selections in rows where the signal named 'ignore' (or whatever you call it) is NOT set
Hello!
Sorry, I do not mean to disturb you, but unfortunately, its still not working out as expected..
Though I'm not sure if I did the correct thing ... but then, I've re-edited it several times yet to no avail...
Could you please, help me out?
My sincere appreciation
But you can of course tell the automation to ignore it
If you add a set/modify signal applied to Betfair row1
arm it to trigger 1 just before the off
on the signal tab set a signal on the selection and give it a name (ie, lets call it 'ignore')
Then on the lay rule go on to the condition tab and add the following condition
Is the signal set on the selection
with the name 'Ignore'
NOT set with a value
What you basically doing is setting a signal on row then telling the lay rule only to trigger on selections in rows where the signal named 'ignore' (or whatever you call it) is NOT set
Hello!
Sorry, I do not mean to disturb you, but unfortunately, its still not working out as expected..
Though I'm not sure if I did the correct thing ... but then, I've re-edited it several times yet to no avail...
Could you please, help me out?
My sincere appreciation
You do not have the required permissions to view the files attached to this post.
-
- Posts: 185
- Joined: Fri Apr 21, 2017 7:56 am
hiya guys
i want to place a back bet after my lay bet in running ,
anyone know how to do this please
thank you
i want to place a back bet after my lay bet in running ,
anyone know how to do this please
thank you
OK.
I think I have figured out what I was doing wrong!
On on the signal tab; I was wrongly setting signal for the market instead of selection.
*set a signal on the selection and give it a name (ie, lets call it 'ignore')*
Thanks all the same, You are appreciated.
I think I have figured out what I was doing wrong!
On on the signal tab; I was wrongly setting signal for the market instead of selection.
*set a signal on the selection and give it a name (ie, lets call it 'ignore')*
Thanks all the same, You are appreciated.
I did say that to you yesterday, then drew your attention to again after you reposted the ruleSmartbot wrote: ↑Fri Mar 16, 2018 6:18 pmOK.
I think I have figured out what I was doing wrong!
On on the signal tab; I was wrongly setting signal for the market instead of selection.
*set a signal on the selection and give it a name (ie, lets call it 'ignore')*
Thanks all the same, You are appreciated.
-
- Posts: 185
- Joined: Fri Apr 21, 2017 7:56 am
hiya guys
i want to place a back bet after my lay bet in running ,
anyone know how to do this please
i want to place a back bet after my lay bet in running ,
anyone know how to do this please
- ShaunWhite
- Posts: 9731
- Joined: Sat Sep 03, 2016 3:42 am
Place your lay as an offset bet with Fill or Kill. The back bet will be placed after the lay bet has been matched. Seach for 'Offset' in the user guide. Or look at this section for how Fill/Kill works -> https://www.betangel.com/user-guide/fil ... 3D&mw=MzA5Swimming999 wrote: ↑Sat Mar 17, 2018 1:21 pmhiya guys
i want to place a back bet after my lay bet in running ,
anyone know how to do this please
- wearthefoxhat
- Posts: 3221
- Joined: Sun Feb 18, 2018 9:55 am
Another great thread. Big thanks to Dallas for his support and quick replies.
Looking more into this as there is ££ potential long term. So many get gubbed <2.00, letting in run and not trade out is probably the way forward as the liability is small for each bet.
Also the size of the field could be a factor. (bigger the better, 10 runners+).
Looking more into this as there is ££ potential long term. So many get gubbed <2.00, letting in run and not trade out is probably the way forward as the liability is small for each bet.
Also the size of the field could be a factor. (bigger the better, 10 runners+).
Hello Guys,
i currently have my own system. This Automation Bot is nice, but anyone can help me to setup this rule? Heres the Example: If the first Horse that goes to 2.00 must be layed at 1.6 That means if the first Horse hit 2.00 and goes down to 1.77 and drift then to 2.00 or 3.00 or 4.00 its void for me and i dont want any bet at this Race. is that possible ? Because i have no idea how to do that. Thank you
i currently have my own system. This Automation Bot is nice, but anyone can help me to setup this rule? Heres the Example: If the first Horse that goes to 2.00 must be layed at 1.6 That means if the first Horse hit 2.00 and goes down to 1.77 and drift then to 2.00 or 3.00 or 4.00 its void for me and i dont want any bet at this Race. is that possible ? Because i have no idea how to do that. Thank you
On the parameters tab change the 'place at ' odds from 2.0 to 1.6ocze0107 wrote: ↑Wed Mar 28, 2018 2:51 pmHello Guys,
i currently have my own system. This Automation Bot is nice, but anyone can help me to setup this rule? Heres the Example: If the first Horse that goes to 2.00 must be layed at 1.6 That means if the first Horse hit 2.00 and goes down to 1.77 and drift then to 2.00 or 3.00 or 4.00 its void for me and i dont want any bet at this Race. is that possible ? Because i have no idea how to do that. Thank you
Dallas wrote: ↑Wed Mar 28, 2018 8:25 pmOn the parameters tab change the 'place at ' odds from 2.0 to 1.6ocze0107 wrote: ↑Wed Mar 28, 2018 2:51 pmHello Guys,
i currently have my own system. This Automation Bot is nice, but anyone can help me to setup this rule? Heres the Example: If the first Horse that goes to 2.00 must be layed at 1.6 That means if the first Horse hit 2.00 and goes down to 1.77 and drift then to 2.00 or 3.00 or 4.00 its void for me and i dont want any bet at this Race. is that possible ? Because i have no idea how to do that. Thank you
This is wrong Dallas. Lets say we have a Race with 10 Horses, Horse Number 4 pass the 2.00 at lay and goes down to 1.70 after that the Horse drift to 1000 and a other Horse wins the Race, the other Horse would be layed at 1.60 , but my criteria is only the first Horse that pass the 2.00 and drop to 1.60 to match my lay is interesting. If the first Horse drift up and a other pass the 1.60 then the bet is void for me. But i dont find a way to setup this.....