Bet Angel - Servants - Shared files : Back or Lay using Money Waiting as your Stake Servant

Share your servants
User avatar
Dallas
Posts: 15039
Joined: Sun Aug 09, 2015 10:57 pm
Contact:

Mon Oct 21, 2019 1:03 pm

Dallas wrote:
Fri Oct 18, 2019 7:02 pm
kaiibix wrote:
Fri Oct 18, 2019 4:25 pm
I'm wondering if someone can explain to me how to add two extras to this servant file?



The two extras are..

1) editing so to specify a price.
2) set a limit for the amount I would like to bet for the race.

Thanks in advance!

Give me a prod on this late tomorrow morning and ill have a look

Hey Dallas just wondering if you maybe got a chance to have a look at this servant question?

Sorry I missed it on Saturday, I did mean for you to give me a prod late Saturday morning UK time, anyway, I've seen it now and to achieve what you want you'll need to make the following changes

Store money Waiting at Lay Price
Arm it to trigger multiple time with a 1 sec re-arm

On the Stored Value tab change 'Price used for look up' to
The Servant context price

Add a Stored Value Condition
To test
The selections lay price
Is equal to servant context price

Lay Bet Rule
Arm it to trigger multiple time with a 1 sec re-arm

Parameters tab
Change place at to
Servant Contect Price

Conditions tab
Add a Stored Value condition
to test
Money available to lay at selection price at
Price used for look up = Servant context price
Is greater than £2
(you could maybe skip that condition or increase the value, its basically saying wait till at least £2 is available before taking it - otherwise, you will end up with loads of penny bets being triggered)

Add a matched bets amount condition
Total amount of lay bets is less than the following fixed amount £X.XX (depending on the odds you will be laying at you'll need to roughly work out what the lay stake will be to reach you $1000 liability)

That should do it, ive not tested any of that so do try it in practice mode first just in case ive missed anything or you make a mistake

Guesst
Posts: 14
Joined: Thu Oct 17, 2019 12:32 pm

Mon Oct 21, 2019 1:45 pm

Dallas wrote:
Mon Oct 21, 2019 1:03 pm
Dallas wrote:
Fri Oct 18, 2019 7:02 pm
kaiibix wrote:
Fri Oct 18, 2019 4:25 pm
I'm wondering if someone can explain to me how to add two extras to this servant file?



The two extras are..

1) editing so to specify a price.
2) set a limit for the amount I would like to bet for the race.

Thanks in advance!

Give me a prod on this late tomorrow morning and ill have a look

Hey Dallas just wondering if you maybe got a chance to have a look at this servant question?

Sorry I missed it on Saturday, I did mean for you to give me a prod late Saturday morning UK time, anyway, I've seen it now and to achieve what you want you'll need to make the following changes

Store money Waiting at Lay Price
Arm it to trigger multiple time with a 1 sec re-arm

On the Stored Value tab change 'Price used for look up' to
The Servant context price

Add a Stored Value Condition
To test
The selections lay price
Is equal to servant context price

Lay Bet Rule
Arm it to trigger multiple time with a 1 sec re-arm

Parameters tab
Change place at to
Servant Contect Price

Conditions tab
Add a Stored Value condition
to test
Money available to lay at selection price at
Price used for look up = Servant context price
Is greater than £2
(you could maybe skip that condition or increase the value, its basically saying wait till at least £2 is available before taking it - otherwise, you will end up with loads of penny bets being triggered)

Add a matched bets amount condition
Total amount of lay bets is less than the following fixed amount £X.XX (depending on the odds you will be laying at you'll need to roughly work out what the lay stake will be to reach you $1000 liability)

That should do it, ive not tested any of that so do try it in practice mode first just in case ive missed anything or you make a mistake


Thanks Dallas for doing this

I left out >> Is greater than £2

But it would not save and was asking to enter a price?

So I entered the £2 price

So for every race i have to change price and save file right?

Guesst
Posts: 14
Joined: Thu Oct 17, 2019 12:32 pm

Mon Oct 21, 2019 1:51 pm

I tried it in practice mode, is it meant to show as a unmatched bet below the ladder, I assume not otherwise the bet is displayed in the ladder, so just not sure how i tell if i followed your steps correctly?

This is the file i added it to attachment.

Thanks
You do not have the required permissions to view the files attached to this post.

User avatar
Dallas
Posts: 15039
Joined: Sun Aug 09, 2015 10:57 pm
Contact:

Mon Oct 21, 2019 2:08 pm

Try this, it's still untested but has everything above changed
Including the following to the lay rule I forgot about when typing out above
Add a Stored Value Condition
To test
The selections lay price
Is equal to servant context price

I've also added the usual 'stop previous servants' rule so that if you change your mind you can start it on a new price on a selection and it will auto stop the previous one at the same time
You do not have the required permissions to view the files attached to this post.

Guesst
Posts: 14
Joined: Thu Oct 17, 2019 12:32 pm

Mon Oct 21, 2019 2:13 pm

OK it seems to be placing the bets correctly I think :-)

But the bets are $2.86 per stake (the price i adjusted was 2.86 for the race) so would take roughly 350 bets and 350 seconds to fill up the whole $1000, but should be accepting the whole $1000 if its available which it is with the big horse racing liquidity?

Guesst
Posts: 14
Joined: Thu Oct 17, 2019 12:32 pm

Mon Oct 21, 2019 2:17 pm

Just tried another horse at $14 and its working again but only placing $14 stake per time so its stake is the price i set?

User avatar
Dallas
Posts: 15039
Joined: Sun Aug 09, 2015 10:57 pm
Contact:

Mon Oct 21, 2019 2:19 pm

kaiibix wrote:
Mon Oct 21, 2019 2:13 pm
OK it seems to be placing the bets correctly I think :-)

But the bets are $2.86 per stake so would take roughly 350 bets and 350 seconds to fill up the whole $1000, but should be accepting the whole $1000 if its available which it is with the big horse racing liquidity?
Yes thats correct, but you can speed up the rearm times and use something like 0.2 (200ms) so will match them much quicker.
But beware of the hourly transaction limit which is why i suggested you put a minimum on what it takes
viewtopic.php?f=47&t=11378

User avatar
Dallas
Posts: 15039
Joined: Sun Aug 09, 2015 10:57 pm
Contact:

Mon Oct 21, 2019 2:21 pm

kaiibix wrote:
Mon Oct 21, 2019 2:17 pm
Just tried another horse at $14 and its working again but only placing $14 stake per time so its stake is the price i set?
It will place whatever the amount waiting is at the price you select, in practice mode because it doesn't actually match the bet it will keep placing that same stake until the amount waiting changes.

Guesst
Posts: 14
Joined: Thu Oct 17, 2019 12:32 pm

Mon Oct 21, 2019 2:33 pm

Dallas wrote:
Mon Oct 21, 2019 2:21 pm
kaiibix wrote:
Mon Oct 21, 2019 2:17 pm
Just tried another horse at $14 and its working again but only placing $14 stake per time so its stake is the price i set?
It will place whatever the amount waiting is at the price you select, in practice mode because it doesn't actually match the bet it will keep placing that same stake until the amount waiting changes.

Ok yes I understand it keeps laying in practice mode previous race laid 100 bets :-)


But what I don't understand and i think its doing it wrong is the liquidity amount for the race was 2k and 5k on average but was only placing $2.86 stake per lay bet (Lay price i entered was 2.86) so Lay stake is copying the price which its not meant to do i think?


So whatever the price i set to lay a horse lets say $5.50, the stake it is laying is 5.50 too.

Can the stake be different to the price i set, like lay the whole $1000 liability i have entered at whatever price i have set in one go? like the original file does for this thread? The original file in this thread Lays whatever is available at best price but instead we want it to lay at the price we set?

User avatar
Dallas
Posts: 15039
Joined: Sun Aug 09, 2015 10:57 pm
Contact:

Mon Oct 21, 2019 2:51 pm

kaiibix wrote:
Mon Oct 21, 2019 2:33 pm
Dallas wrote:
Mon Oct 21, 2019 2:21 pm
kaiibix wrote:
Mon Oct 21, 2019 2:17 pm
Just tried another horse at $14 and its working again but only placing $14 stake per time so its stake is the price i set?
It will place whatever the amount waiting is at the price you select, in practice mode because it doesn't actually match the bet it will keep placing that same stake until the amount waiting changes.

Ok yes I understand it keeps laying in practice mode previous race laid 100 bets :-)


But what I don't understand and i think its doing it wrong is the liquidity amount for the race was 2k and 5k on average but was only placing $2.86 stake per lay bet (Lay price i entered was 2.86) so Lay stake is copying the price which its not meant to do i think?


So whatever the price i set to lay a horse lets say $5.50, the stake it is laying is 5.50 too.

Can the stake be different to the price i set, like lay the whole $1000 liability i have entered at whatever price i have set in one go? like the original file does for this thread? The original file in this thread Lays whatever is available at best price but instead we want it to lay at the price we set?
Assuming you haven't changed anything in the file I've just uploaded it will place lay bets of whatever is waiting at that price (not place bets the size of the price you start the servant at).

So if you clicked to lay at 2.40 regardless of what the price currently is when the lay price becomes 2.40 it will place a lay for whatever the amount is then waiting, if someone puts another £X.XX at that price it will then take that.
If the odds then move up or down away from 2.40 it will stop placing bets until it returns to that price - or whatever new price you click on until it hits your limit (which i randomly set at £500 before uploading the file).

Post Reply

Return to “Bet Angel - Servants - Shared files”

  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest