Thats just perfect. Thank you as always for the help Dallas! I am grateful.Dallas wrote: ↑Thu Jan 21, 2021 11:05 amunderx wrote: ↑Thu Jan 21, 2021 8:56 amI have a quick question about signals.
Lets say i have a signal to monitor a certain runner and that signal is set to activate when the runner is between odds of X and Y. The signal is set to unlimited trigger and unlmited re-arms.
Does this mean that the signal automatically resets itself or stop considering the runner once its outside the range of X and Y?
The signal rule will continue to trigger all the time the selection remains between those odds and satisfies your conditions.
You'd need another two signal rules to clear the signals
one with a condition odds are less than X
the other with a condition odds are greater than Y
Yes, if doing as above and resetting the signal outside the odds you could add a signal condition to test the signal is NOT set with a value
Using Automation Signals
-
- Posts: 58
- Joined: Thu Jun 23, 2011 1:22 am
Is there anything in automation that allows you to use the volume on the front 3 as what appears on the bottom of the ladder please?
I can see WOM and volume etc but cant see anything that covers that
I can see WOM and volume etc but cant see anything that covers that
There's the option of using traded volume on a runner, or under stored values you can also test the traded volume % per runner.fractalmodel wrote: ↑Mon Feb 01, 2021 2:48 pmIs there anything in automation that allows you to use the volume on the front 3 as what appears on the bottom of the ladder please?
I can see WOM and volume etc but cant see anything that covers that
If you are looking to add or average the front'X' runners the latest V1.56 has a new option added to stored values which will let you sum up stored values
viewtopic.php?f=46&t=22831
-
- Posts: 58
- Joined: Thu Jun 23, 2011 1:22 am
Does the traded volume discriminate by time for Inplay and preplay and is it possible to set for the last x seconds please?
You can set it anyway you wantfractalmodel wrote: ↑Tue Feb 09, 2021 10:44 amDoes the traded volume discriminate by time for Inplay and preplay and is it possible to set for the last x seconds please?
There's an example here that you can reset whenever you want and it covers the increase in percent (but can be changed to actual volume)
viewtopic.php?f=65&t=22993
This one displays the in-play increase over fixed and rolling periods
viewtopic.php?f=65&t=22876
The third example here is just for the in-play traded volume
viewtopic.php?f=61&t=16350
Hello
Is it possible to automate a strategy which backs identified horses in different races but which stakes the winning from the previous bet? Eg bet 1 is $10 at 2.00 and wins $10 ignoring commission. Bet 2 is then $20 at 2 and wins $20 ignoring commission. Bet 3 is $30 and so on. The sequence would stop at a losing bet and start again. I only place 2 or 3 bets per day so my strike rate is good and the strategy is profitable.
Any comments gratefully received.
Is it possible to automate a strategy which backs identified horses in different races but which stakes the winning from the previous bet? Eg bet 1 is $10 at 2.00 and wins $10 ignoring commission. Bet 2 is then $20 at 2 and wins $20 ignoring commission. Bet 3 is $30 and so on. The sequence would stop at a losing bet and start again. I only place 2 or 3 bets per day so my strike rate is good and the strategy is profitable.
Any comments gratefully received.
Hi Dallas,
Just tried to make my 1st automation bot using signals.
What I am trying to achieve is to trade out of a position for a loss on 70 minutes & the back odds are less than 2.02.
I have 2 Set signals palced on my "close trade for a loss" rule.
One called 70 minutes and the other called <2.02.
So I have set the 1st condition (in play) to trigger at the 1 hour 26 minutes mark in play till two hours, and I have set my <2.02 for the same.
From what I can gather both signals have to be true in order for the position to be closed, so if, for example 70 minutes has passed, but the odds are still above 2.02, it will not fire until both signals are satisfied.
Please tell me I have this right!!!
Many thanks Dallas.
Just tried to make my 1st automation bot using signals.
What I am trying to achieve is to trade out of a position for a loss on 70 minutes & the back odds are less than 2.02.
I have 2 Set signals palced on my "close trade for a loss" rule.
One called 70 minutes and the other called <2.02.
So I have set the 1st condition (in play) to trigger at the 1 hour 26 minutes mark in play till two hours, and I have set my <2.02 for the same.
From what I can gather both signals have to be true in order for the position to be closed, so if, for example 70 minutes has passed, but the odds are still above 2.02, it will not fire until both signals are satisfied.
Please tell me I have this right!!!
Many thanks Dallas.
You could do that without the need for signalsJimmyH wrote: ↑Tue Mar 09, 2021 9:47 amHi Dallas,
Just tried to make my 1st automation bot using signals.
What I am trying to achieve is to trade out of a position for a loss on 70 minutes & the back odds are less than 2.02.
I have 2 Set signals palced on my "close trade for a loss" rule.
One called 70 minutes and the other called <2.02.
So I have set the 1st condition (in play) to trigger at the 1 hour 26 minutes mark in play till two hours, and I have set my <2.02 for the same.
From what I can gather both signals have to be true in order for the position to be closed, so if, for example 70 minutes has passed, but the odds are still above 2.02, it will not fire until both signals are satisfied.
Please tell me I have this right!!!
Many thanks Dallas.
The close trade rule just needs a 'Fixed Odds Condition' to test the price is less than 2.02
Dallas wrote: ↑Tue Mar 09, 2021 12:58 pmYou could do that without the need for signalsJimmyH wrote: ↑Tue Mar 09, 2021 9:47 amHi Dallas,
Just tried to make my 1st automation bot using signals.
What I am trying to achieve is to trade out of a position for a loss on 70 minutes & the back odds are less than 2.02.
I have 2 Set signals palced on my "close trade for a loss" rule.
One called 70 minutes and the other called <2.02.
So I have set the 1st condition (in play) to trigger at the 1 hour 26 minutes mark in play till two hours, and I have set my <2.02 for the same.
From what I can gather both signals have to be true in order for the position to be closed, so if, for example 70 minutes has passed, but the odds are still above 2.02, it will not fire until both signals are satisfied.
Please tell me I have this right!!!
Many thanks Dallas.
The close trade rule just needs a 'Fixed Odds Condition' to test the price is less than 2.02
Oh!!
I seem to have eureka moments, and then when I try it out something goes horribly tits up!!
Like for example on the same automation bot, which is LTD at KO, I have a green up all selections rule.
This runs from 10 secs in play until 2 hours in play.
Conditions are:-
The match is in Play.
Unsuspended for 180 secs.
Green up value is greater than 50p.
In testing it just greens up immediately for a loss.
I must admit I am getting frustrated!!
im trying to use signals on a version of emerging challenger and am nearly there. to explain
1st rule clears any existing unmatched historical bets (on the runner) and sets a counter running (to increment signal value ) whilst the runner is leading (favourite)
2nd rule clears the counter if the horse is no longer favourite.
3rd rule places a fill/kill back bet if the counter is greater than 3 seconds and the runner is still leading.
my question is if the bet is killed and I want a fresh bet placed at the new odds available on the horse provided it is first in the market still how do i do that. I could loop back to the 1st rule but it get complicated with new/existing signals ?
thanks in advance
1st rule clears any existing unmatched historical bets (on the runner) and sets a counter running (to increment signal value ) whilst the runner is leading (favourite)
2nd rule clears the counter if the horse is no longer favourite.
3rd rule places a fill/kill back bet if the counter is greater than 3 seconds and the runner is still leading.
my question is if the bet is killed and I want a fresh bet placed at the new odds available on the horse provided it is first in the market still how do i do that. I could loop back to the 1st rule but it get complicated with new/existing signals ?
thanks in advance
Its tricky to give an exact answer without knowing the conditions of your first rule, it sounds like your clearing pre-off matched bets when it first triggers, then want to add it into a 'loop' for the emerging runner part?iggypop37 wrote: ↑Sun Mar 21, 2021 10:02 pmim trying to use signals on a version of emerging challenger and am nearly there. to explain
1st rule clears any existing unmatched historical bets (on the runner) and sets a counter running (to increment signal value ) whilst the runner is leading (favourite)
2nd rule clears the counter if the horse is no longer favourite.
3rd rule places a fill/kill back bet if the counter is greater than 3 seconds and the runner is still leading.
my question is if the bet is killed and I want a fresh bet placed at the new odds available on the horse provided it is first in the market still how do i do that. I could loop back to the 1st rule but it get complicated with new/existing signals ?
thanks in advance
If so on your first rule you could maybe add a 'unmatched bets condition' on selection is equal to 0
and signal condition is not set or hasn't been set in 'X' seconds etc
thanks Dallas I think that is sorted now. To explain I am trying to catch fancied runners at 3 stages,Dallas wrote: ↑Mon Mar 22, 2021 2:19 pmIts tricky to give an exact answer without knowing the conditions of your first rule, it sounds like your clearing pre-off matched bets when it first triggers, then want to add it into a 'loop' for the emerging runner part?iggypop37 wrote: ↑Sun Mar 21, 2021 10:02 pmim trying to use signals on a version of emerging challenger and am nearly there. to explain
1st rule clears any existing unmatched historical bets (on the runner) and sets a counter running (to increment signal value ) whilst the runner is leading (favourite)
2nd rule clears the counter if the horse is no longer favourite.
3rd rule places a fill/kill back bet if the counter is greater than 3 seconds and the runner is still leading.
my question is if the bet is killed and I want a fresh bet placed at the new odds available on the horse provided it is first in the market still how do i do that. I could loop back to the 1st rule but it get complicated with new/existing signals ?
thanks in advance
If so on your first rule you could maybe add a 'unmatched bets condition' on selection is equal to 0
and signal condition is not set or hasn't been set in 'X' seconds etc
1) prior to the off when steamed in,
2) 30 secs if when current price < BSP,
3) and any strong runners that emerge to go fav later on.
the answer would seem to be use of appropriate fill/kill rules and signals , which prevent you from backing runners more than once, and enable you to back horses which come back into contention later
simple once you know how
Cheers !
-
- Posts: 41
- Joined: Mon Sep 04, 2017 7:27 pm
Say your laying a horse in running at 2, can you set a rule so that no trade will be placed if the SP fav is less than 2.5 even if that isnt the horse that does hit 2 first? So basically if the SP fav is less than 2.5 SP the bot knows not to make a trade at all on anything in the race.
Thanks
Thanks
Yes you can run a 'Set/Modify Signal' rule armed just before the start time and applied to the faviangrant230 wrote: ↑Tue Mar 23, 2021 6:53 amSay your laying a horse in running at 2, can you set a rule so that no trade will be placed if the SP fav is less than 2.5 even if that isnt the horse that does hit 2 first? So basically if the SP fav is less than 2.5 SP the bot knows not to make a trade at all on anything in the race.
Thanks
With a fixed odds condition to test the price is greater than 2.5
Then on the signal tab set a signal on the selection
Then on your lay bet rule add a 'Signal Set' condition to test the signal named (whatever you called it above) is NOT set on the selection