Signal when Goals are Scored Guardian Automation Bot

Post Reply
iain3
Posts: 22
Joined: Wed May 31, 2017 7:28 pm

Thank you, Dallas,

I did have the refresh rate set to 1 second,but I've now changed it to 200 milliseconds - this is the fastest I have with version 1.47.0. Though earlier when it failed, I had only got 4 or 5 matches selected. But I'll keep trying with the faster setting.

Iain.
Lay Over 1.5 Goals After a Goal.baf
You do not have the required permissions to view the files attached to this post.
User avatar
Dallas
Posts: 22731
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

iain3 wrote:
Fri Jun 02, 2017 10:19 pm
Thank you, Dallas,

I did have the refresh rate set to 1 second,but I've now changed it to 200 milliseconds - this is the fastest I have with version 1.47.0. Though earlier when it failed, I had only got 4 or 5 matches selected. But I'll keep trying with the faster setting.

Iain.Lay Over 1.5 Goals After a Goal.baf
4-5 markets shouldn't make any difference even with a 1 sec refresh rate, if you enable streaming settings > edit settings > communications you can refresh as fast as 20ms (update 50 markets every second in guardian).

I'll try take a look at the rule in morning see if i can see anything a miss
iain3
Posts: 22
Joined: Wed May 31, 2017 7:28 pm

Cheers Dallas that would be great.

Incidentally, I've checked Streaming Settings as per the other post, but it still limits me to 200 milliseconds. I've attached a screenshot.

Iain.
You do not have the required permissions to view the files attached to this post.
User avatar
Dallas
Posts: 22731
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

iain3 wrote:
Sat Jun 03, 2017 8:56 am
Cheers Dallas that would be great.

Incidentally, I've checked Streaming Settings as per the other post, but it still limits me to 200 milliseconds. I've attached a screenshot.

Iain.
Those are just the back ground prices, if you now look at the refresh rates on your main trading screen and in guardian you will have 20ms available
iain3
Posts: 22
Joined: Wed May 31, 2017 7:28 pm

Thanks Dallas,

Now on 20 milliseconds. Hopefully it will now start working :-)

Iain.
User avatar
Dallas
Posts: 22731
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

iain3 wrote:
Sat Jun 03, 2017 11:12 am
Thanks Dallas,

Now on 20 milliseconds. Hopefully it will now start working :-)

Iain.
I found the problems with your rule;

On your lay rule add a 'signal set condition'
is the signal on market
named 'goal'
set with a value

also remove the 'Green all profit condition' from your lay rule and put it on your 'green up' rule
(at the moment your saying place lay bet if profit is >£0 which of course it isn't as no bet has been placed yet therefore it cant trigger.

I would also place the lay at 2nd/3rd best market price just to ensure it has a better chance of being matched when its placed
iain3
Posts: 22
Joined: Wed May 31, 2017 7:28 pm

Dallas, thank you so much for all your help and patience. Seriously appreciated!

Iain.
iain3
Posts: 22
Joined: Wed May 31, 2017 7:28 pm

I've just tried this on some matches that started at 11am, but on all of them that have now gone in-play, it's placed the Lay bet at 11am too.

There is not much liquidity, which I'm sure is likely the reason and the odds between the back and lay prices are in some cases very large indeed. I know I can add a Volume condition, but is there anything I can add to ensure it won't bet if there is a large gap between back and lay prices?

EDIT: Since I started writing this post, another bet has got matched again practically at KO, but this time the market had nearly £5,000 matched and the odds were close, so maybe it's not a liquidity issue?

Also, despite having the Off-set bet percentage to 50%, it greened out to £0.00. Does the Green All Profit Condition in my Green Up Rule override the off-set bet percentage setting?

Iain.
User avatar
Dallas
Posts: 22731
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

iain3 wrote:
Sun Jun 04, 2017 11:11 am
I've just tried this on some matches that started at 11am, but on all of them that have now gone in-play, it's placed the Lay bet at 11am too.

There is not much liquidity, which I'm sure is likely the reason and the odds between the back and lay prices are in some cases very large indeed. I know I can add a Volume condition, but is there anything I can add to ensure it won't bet if there is a large gap between back and lay prices?

EDIT: Since I started writing this post, another bet has got matched again practically at KO, but this time the market had nearly £5,000 matched and the odds were close, so maybe it's not a liquidity issue?

Also, despite having the Off-set bet percentage to 50%, it greened out to £0.00. Does the Green All Profit Condition in my Green Up Rule override the off-set bet percentage setting?

Iain.
Did you add the 'signal set condition' to your lay rule as above? that would explain why the lays triggering immediately after KO
Yes the greening rule will override an offset if its conditions are met, you could set your green up rule to arm after 1min

The 'relative odds condition' can be used to check there is no gaps between the back and lay price,
ie selections back price
is equal to its lay price
minus 1 tick
iain3
Posts: 22
Joined: Wed May 31, 2017 7:28 pm

Thanks again, Dallas.

I did indeed add the 'signal set condition' to my lay rule as you suggested. I've attached a screengrab.

For the Green Up to Arm after 60 seconds: is this using the Unsuspended Time Condition and set to greater than 60 seconds.

I've also used the Relative Odds Condition as suggested.

Really sorry for giving you all this hassle, Dallas.

Iain.
You do not have the required permissions to view the files attached to this post.
User avatar
Dallas
Posts: 22731
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

In that image you are setting another signal (when the lay triggers)

you need to remove that and go onto the 'conditions' tab and add a 'signal set condition' set up as follows
is the signal on market
named 'goal'
set with a value

That will instruct your lay to trigger only after the signal 'goal' has been set by the odds moving 10 ticked
iain3
Posts: 22
Joined: Wed May 31, 2017 7:28 pm

Thanks ever so much, Dallas,

I think I've done everything correctly now. Would you mind taking a quick look at the attached rules file, please?

Iain.
You do not have the required permissions to view the files attached to this post.
iain3
Posts: 22
Joined: Wed May 31, 2017 7:28 pm

I'm guessing I've still got something wrong as I've been trying this on lots more matches where there have been some matches where the odds have been close and some goals, but no bets being placed.

I'm frustrating myself, so sincere apologies for most likely frustrating you too.

Iain.
User avatar
Dallas
Posts: 22731
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Give this a go, had to do it quickly between tennis severs :) so do in practice or low stakes
You do not have the required permissions to view the files attached to this post.
iain3
Posts: 22
Joined: Wed May 31, 2017 7:28 pm

I really appreciate that - thank you so much, Dallas.

When I try to import it, I get an error saying it was created with a different version of BetAngel. I've seen on some other posts here where that has happened, they've been using older versions - but it appears that I'm not. I'm on 1.47.0, which appears to be the latest version?
https://www.betangel.com/download/

Iain.
Post Reply

Return to “Bet Angel Automation - Football”